Introduction

Calcium silicate boards are an effective solution for fireproofing in various construction applications. This guide outlines the step-by-step process for proper installation.

Materials and Tools Needed

• Calcium silicate boards

• Measuring tape

• Utility knife

• Level

• Drill and screws or adhesive

• Protective gear (gloves, goggles, mask)

Installation Steps

1. Prepare the Area

Clear the installation area of any debris. Ensure that the surface where the boards will be installed is clean and dry.

2. Measure and Mark

Use a measuring tape to determine the size of the boards needed. Mark the installation points on the wall or ceiling where the boards will be placed.

3. Cut the Boards

Using a utility knife, score the boards along the marked lines. Break the board along the score and cut the backing to create the desired shape.

4. Secure the Boards

Position the boards against the wall or ceiling. Use screws or adhesive to secure them in place. Ensure the boards are level and tightly fitted together.

5. Seal Joints

Apply a suitable sealing compound to all joints and edges to enhance fire resistance and prevent moisture infiltration.

6. Final Inspection

Inspect the installation for any gaps or loose sections. Ensure everything is securely fastened and properly sealed.